ASTRAL 系列热电偶探测器包括: AC2500S, AC25FXS,ACX25FXS,AC2501S,AC2504S,AC25UVS; AC5000S,AC50FXS..........详细参数及规格见下表.
|
Astral 系列光电功率计
表头型号
|
AI51
|
AI51D
|
显示
|
4位LCD显示
|
|
量程(W)
|
50.00m,5.000m,500.0u,50.00u
|
4.000m,400.0u,40.0u
|
响应时间
|
<1s
|
|
工作温度
|
5-40度
|
型号
|
AC2500S
|
AC25FXS
|
ACX25FXS
|
AC2501S
|
ACX2501S
|
AC2504S
|
AC25UVS
|
AC5000S
|
AC50FXS
|
ACX50FXS
|
AC5001S
|
ACX5001S
|
AC5004S
|
AC50UVS
|
吸收类型
|
表面吸收
|
表面吸收
|
表面吸收
|
体吸收
|
体吸收
|
体吸收
|
体吸收
|
表面吸收
|
表面吸收
|
表面吸收
|
体吸收
|
体吸收
|
体吸收
|
体吸收
|
孔径
|
25.4mm
|
25.4mm
|
8mm
|
25.4mm
|
8mm
|
25.4mm
|
25.4mm
|
50.8mm
|
50.8mm
|
16mm
|
50.8mm
|
16mm
|
50.8mm
|
50.8mm
|
波长范围um
|
0.25-35
|
0.193-26
|
0.4-2
|
0.266-1.2
|
0.4-1.2
|
0.85-4.2
|
0.193-0.36
|
0.25-35
|
0.193-26
|
0.4-2
|
0.266-1.2
|
0.4-1.2
|
0.85-4.2
|
0.193-0.36
|
最大功率
|
1mW-10mW
|
40mW-30W
|
||||||||||||
噪声
|
10mW or uJ
|
40uW or uJ
|
||||||||||||
最大P.D
|
200W/cm2
|
6W/cm2
|
48W/cm2
|
|
|
|
|
200W/cm2
|
200W/cm2
|
200W/cm2
|
|
|
|
|
最大单脉能量
|
30J
|
100J
|
||||||||||||
可重复性
|
<1%
|
<1%
|
||||||||||||
精度
|
±3%
|
±3%
|
||||||||||||
响应时间
|
3s
|
|
||||||||||||
尺寸cm
|
9.5x5.6
|
9.5x5.6
|
9.5x5.7
|
9.5x5.6
|
9.5x5.7
|
9.5x5.6
|
9.5x5.6
|
12.1x5.8
|
12.1x5.8
|
12.1x10
|
12.1x5.8
|
12.1x10
|
12.1x5.8
|
12.1x5.8
|
标准功率计/能量计配置均包含直径1.27cm,长8.9cm的安装杆,方便客户安装在光学平台上使用。一些型号还配有遮光器用于阻挡环境光的干扰。可选的附件包括野外使用时用到的电加热器、携带包、光纤适配器、底座等。
以下附件供选择:
Mounting System | This sturdy mounting system has a moldable. weighted, rubber base with a non-slip surface, ball mounts, and an Astral Series S cradle. The system will hold the Astral Series S meter up to 12 inches vertically above your working surface in an upright position. The ball mounts let you reposition the meter to accommodate any viewing angle you desire. You can also readily remove the Astral Series S meter for safekeeping at the end of the day. |
Lithium Battery | The battery can be easily installed either in the field or at the factory. It is a rechargeable, lithium-poly Battery with in-use time of 12 hours before needing recharging. Charging time is one hour. |
Model 36-0203A Isoperibol™ Enclosure | The 36-0203A isolates the 25mm Astral calorimeters from environmental thermal disturbances which affect the stability of the calorimeter output when attempting low power and energy measurements. Scientech recommends using this enclosure when attempting power measurements below 30 mW and single pulse energy measurements below 30 mJ. |
Bases | These bases will hold the Astral Series S Detector upright on your working surface. Base 11788, which is a slotted base, will bolt down to your optical bench. Base 301019 will work on any surface. |
Calibration Tool | Digital field calibration tool to be used with optional calorimeter electric substitution heater coils. |
Fiberoptic Holder and Adapters | The fiberoptic holder and adapters provide direct fiber hookup to the Astral calorimeter. Adapters that accept SMA, ST, FC, DIN, E2000 connectors or any 2.5 mm ferrule are available. |
Model 301-LLCA Carrying Case | The Model 301-LCCA carrying case is designed to embrace the AI310 indicators along with Astral calorimeters, Vector pyroelectric detectors, and Ultra calorimeters as well as bases, cables, and power cords. |
9663 Carrying Case (soft) | Soft carrying case with belt loops forthe AI310 meters. |
Model 301-020R Photodiode Detector | The high speed photodiode detector is designed for use with the 25 mm Astral calorimeters as an attachment to the calorimeter aperture. Energy scattered back from the calorimeter’s absorber when struck by an energetic pulse provides an attenuated sample of the incident laser pulse sufficient to activate the silicon diode. This provides a temporal profile of the laser pulse when viewed on an oscilloscope. An internal battery eliminates all wires except the coaxial cable to the sampling oscilloscope. |
上一篇:GENTEC-EO光检器
下一篇:Coherent相干功率计